Cam Kennedycamkennedy.ai
← Prints

3D printers

Which printer
should I buy?

It's the question I get asked the most. My short answer: a Bambu Lab. Here's how I got there, and which one I'd pick for you.

My picks right now

Three printers, depending on where you're starting. As of Nov 2026.

Starting out on a budget

Bambu Lab A1

The easiest way in. An open-frame printer that works right out of the box, and you can add the AMS lite later for multi-colour prints. Short on space? The A1 mini is the same idea, smaller (from CA$249).

CA$339–$539 printer alone to colour combo

See it at Bambu Lab

Ready for more

Bambu Lab X2D

Two nozzles instead of one, so it can print a second material for clean, easy-to-remove supports, or mix materials in one print. It also has a heated chamber for tougher filaments. It's next on my list.

CA$859–$1,409 printer alone to colour combo

See it at Bambu Lab

The add-on everyone asks about

Should I buy the AMS unit?

Hover for my answer

If you have the budget for it, YES! The AMS has been a game changer for me personally, opening up a lot of fun multi-colour and multi-part builds.

See the AMS 2 Pro ↗ · the A1 uses the AMS lite

Prices are from Bambu Lab's Canadian store on November 17, 2026, from the printer on its own (at its best current price) up to the combo with the AMS for multi-colour printing. They change often, and the links take you to your own country's Bambu store. These aren't affiliate links; I just like the printers.

How I got here

  1. Where I started

    Creality Ender 3 V2

    Back when 3D printing meant tinkering: levelling the bed by hand, swapping parts and tuning settings before every good print. I learned a lot. I also spent a lot of time fixing the printer instead of printing.

  2. What I use now

    Bambu Lab P1S

    I've had it for a couple of years and I love it. It's still a very, very good printer. There are just better options now, which is why I point people to the P2S.

  3. Next on my list

    Bambu Lab X2D

    Dual nozzles unlock prints my P1S can't do well. I'm holding off a little longer in case a new generation lands next year, but if I were buying today, this would be it.

Why
Bambu Lab?

Bambu Lab changed the game. Their printers are often called the Apple of 3D printing: you plug them in and they work. No levelling by hand, no tinkering, just printing.

The company was started by engineers who came from DJI, the drone maker, and it shows. The hardware is polished and the software is simple.

The common knock is that Bambu is more closed than the open-source printers a lot of us grew up with. That's fair. My take: right now, plug and play wins. That's why I always end up recommending Bambu.

Watch on YouTube: The Infill Podcast, episode 13Bambu Lab's founder, Dr. Ye Tao (formerly at DJI), answers questions about the company

Want to see what these printers can do? Everything on my Prints page came off a Bambu (or that Ender, back in the day).

See my prints →